View Catalog Page The Type 60 Series allows a driving diameter of 0.28 inch to 0.55 inch. This design is generally used in medium roughing operations and can handle loads of up to 3,000 Ibs. The pressure equalization of the driving pins is provided by hydraulic fluid. This permits a seven-degree pitch on the end face of the part. Behind every driving pin is a sealed piston that prevents oil leakage. The oil cavities behind the pistons are interconnected and the whole system is enclosed. This series is available in a taper shank, chuck or flange mount. The flange mount is preferred due to higher stability and increased concentricity capabilities. When using a flange mount design, a spindle adapter and mounting screws are required. The flange mount results in less wear on the machine and machine spindle. The taper shank and chuck mount allow for the face driver to be changed quickly when using the machine for other applications.
Unit of Measure
Specifications
Tool Series/Type |
N/A 60 |
Design Type |
N/A Hydraulic, TIR greater than .0015 |
Mounting Style |
N/A 5 |
Drive Pin Part # |
N/A P6002 |
Pin Style |
N/A Offset |
Driving Diameter |
N/A 0.280 Inch |
Rotation |
N/A Clockwise |
No. of Pin |
N/A 4 |
Driving Diameter Ranges "G" |
N/A 0.28 - 0.55 Inch |
Min. Raw Stock Size Range "S" |
N/A 0.290 Inch |
Max. Raw Stock Size Range "S" |
N/A 1.100 Inch |
Tail Stock Force |
N/A 420 lbs |
Dim. "A" |
N/A 4.510 Inch |
Dim. "B" |
N/A 8.640 Inch |
Dim. "C" |
N/A 2.500 Inch |
Dim. "b" |
N/A 20.000 Degree |
Dim. "N" |
N/A 0.350 Inch |
Notes |
N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter. |
Max. Part Weight |
N/A 84 lbs |
Center Point Part # |
N/A C6001 |
Center Hole Diameter Range (Inch) |
N/A 0.118 to 0.197 |
Dim. "a" |
N/A 20.000 Degree |
Dim. "D" |
N/A 2.500 Inch |
Dim. "E" |
N/A 1.190 Inch |
Dim. "F" |
N/A 0.950 Inch |
Dim. "G" |
N/A 1.950 Inch |
Dim. "H" |
N/A 1.440 Inch |
Dim. "J" |
N/A 0.120 Inch |
Dim. "K" |
N/A 0.190 Inch |
Dim. "P" |
N/A 0.280 Inch |
Dim. "R" |
N/A 0.220 Inch |
Dim. "S" |
N/A 3.937 Inch |
Dim. "T" |
N/A 3.150 Inch |
