Riten Industries Inc. - Type 60 / Driving Diameter Range: 0.28 - 0.55 Inch

View Catalog Page The Type 60 Series allows a driving diameter of 0.28 inch to 0.55 inch. This design is generally used in medium roughing operations and can handle loads of up to 3,000 Ibs. The pressure equalization of the driving pins is provided by hydraulic fluid. This permits a seven-degree pitch on the end face of the part. Behind every driving pin is a sealed piston that prevents oil leakage. The oil cavities behind the pistons are interconnected and the whole system is enclosed. This series is available in a taper shank, chuck or flange mount. The flange mount is preferred due to higher stability and increased concentricity capabilities. When using a flange mount design, a spindle adapter and mounting screws are required. The flange mount results in less wear on the machine and machine spindle. The taper shank and chuck mount allow for the face driver to be changed quickly when using the machine for other applications.

Request Information Search by Specification

Unit of Measure

Items	6003-P6001C6001 Offset Pin Style Counterclockwise 3 Mounting Style 0.118 to 0.197 Inch (in) Center Hole Diameter Range and 0.28 Inch (in) Driving Diameter Face Driver	6003-P6001C6002 Offset Pin Style Counterclockwise 3 Mounting Style 0.197 to 0.354 Inch (in) Center Hole Diameter Range and 0.28 Inch (in) Driving Diameter Face Driver	6003-P6001C6003 Offset Pin Style Counterclockwise 3 Mounting Style 0.354 to 0.433 Inch (in) Center Hole Diameter Range and 0.28 Inch (in) Driving Diameter Face Driver	6003-P6002C6001 Offset Pin Style Counterclockwise 3 Mounting Style 0.118 to 0.197 Inch (in) Center Hole Diameter Range and 0.55 Inch (in) Driving Diameter Face Driver	6003-P6002C6002 Offset Pin Style Counterclockwise 3 Mounting Style 0.197 to 0.354 Inch (in) Center Hole Diameter Range and 0.55 Inch (in) Driving Diameter Face Driver
Tool Series/Type	N/A 60
Design Type	N/A Hydraulic, TIR greater than .0015
Mounting Style	N/A 3
Drive Pin Part #	N/A P6001	N/A P6001	N/A P6001	N/A P6002	N/A P6002
Pin Style	N/A Offset
Driving Diameter	N/A 0.280 Inch	N/A 0.280 Inch	N/A 0.280 Inch	N/A 0.550 Inch	N/A 0.550 Inch
Rotation	N/A Counterclockwise
No. of Pin	N/A 4
Driving Diameter Ranges "G"	N/A 0.28 - 0.55 Inch
Min. Raw Stock Size Range "S"	N/A 0.290 Inch
Max. Raw Stock Size Range "S"	N/A 1.100 Inch
Tail Stock Force	N/A 420 lbs
Dim. "A"	N/A 4.380 Inch
Dim. "B"	N/A 7.320 Inch
Dim. "C"	N/A 2.500 Inch
Dim. "b"	N/A 20.000 Degree
Dim. "N"	N/A 0.350 Inch
Notes	N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.
Max. Part Weight	N/A 84 lbs
Center Point Part #	N/A C6001	N/A C6002	N/A C6003	N/A C6001	N/A C6002
Center Hole Diameter Range (Inch)	N/A 0.118 to 0.197	N/A .197 to 0.354	N/A .354 to 0.433	N/A 0.118 to 0.197	N/A .197 to 0.354
Dim. "a"	N/A 20.000 Degree
Dim. "D"	N/A 2.500 Inch
Dim. "E"	N/A 1.190 Inch
Dim. "F"	N/A 0.950 Inch
Dim. "G"	N/A 1.950 Inch
Dim. "H"	N/A 1.440 Inch
Dim. "J"	N/A 0.120 Inch
Dim. "K"	N/A 0.190 Inch
Dim. "P"	N/A 0.280 Inch
Dim. "R"	N/A 0.220 Inch
Dim. "S"	N/A 3.937 Inch
Dim. "T"	N/A 3.150 Inch
U Bolt No.	N/A
Dim. "U"	N/A
Dim. "W"	N/A
Dim. "X"	N/A
Dim. "Z"	N/A