Riten Industries Inc. - Type 61 / Driving Diameter Range: 0.60 - 0.98 Inch

View Catalog Page The Type 61 Series allows a driving diameter of 0.60 inch to 0.98 inch. This design is generally used in medium roughing operations and can handle loads of up to 3,000 Ibs. The pressure equalization of the driving pins is provided by hydraulic fluid. This permits a seven-degree pitch on the end face of the part. Behind every driving pin is a sealed piston that prevents oil leakage. The oil cavities behind the pistons are interconnected and the whole system is enclosed. This series is available in a taper shank, chuck or flange mount. The flange mount is preferred due to higher stability and increased concentricity capabilities. When using a flange mount design, a spindle adapter and mounting screws are required. The flange mount results in less wear on the machine and machine spindle. The taper shank and chuck mount allow for the face driver to be changed quickly when using the machine for other applications.

Request Information Search by Specification

Unit of Measure

Items	6103-P6101C6101 Offset Pin Style Counterclockwise 3 Mounting Style 0.60 Inch (in) Driving Diameter and 0.118 to 0.197 Inch (in) Center Hole Diameter Range Face Driver	6103-P6101C6102 Offset Pin Style Counterclockwise 3 Mounting Style 0.60 Inch (in) Driving Diameter and 0.197 to 0.275 Inch (in) Center Hole Diameter Range Face Driver	6103-P6101C6103 Offset Pin Style Counterclockwise 3 Mounting Style 0.60 Inch (in) Driving Diameter and 0.275 to 0.354 Inch (in) Center Hole Diameter Range Face Driver	6103-P6101C6104 Offset Pin Style Counterclockwise 3 Mounting Style 0.60 Inch (in) Driving Diameter and 0.354 to 0.433 Inch (in) Center Hole Diameter Range Face Driver	6103-P6101C6105 Offset Pin Style Counterclockwise 3 Mounting Style 0.60 Inch (in) Driving Diameter and 0.433 to 0.511 Inch (in) Center Hole Diameter Range Face Driver
Tool Series/Type	N/A 61
Design Type	N/A Hydraulic, TIR greater than .0015
Mounting Style	N/A 3
Drive Pin Part #	N/A P6101
Pin Style	N/A Offset
Driving Diameter	N/A 0.600 Inch
Rotation	N/A Counterclockwise
No. of Pin	N/A 4
Driving Diameter Ranges "G"	N/A 0.60 - 0.98 Inch
Min. Raw Stock Size Range "S"	N/A 0.610 Inch
Max. Raw Stock Size Range "S"	N/A 2.000 Inch
Tail Stock Force	N/A 800 lbs
Dim. "A"	N/A 4.380 Inch
Dim. "B"	N/A 7.440 Inch
Dim. "C"	N/A 2.500 Inch
Dim. "b"	N/A 20.000 Degree
Dim. "N"	N/A 0.200 Inch
Notes	N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.
Max. Part Weight	N/A 84 lbs
Center Point Part #	N/A C6101	N/A C6102	N/A C6103	N/A C6104	N/A C6105
Center Hole Diameter Range (Inch)	N/A 0.118 to 0.197	N/A .197 to 0.275	N/A .275 to 0.354	N/A .354 to 0.433	N/A .433 to 0.511
Dim. "a"	N/A 20.000 Degree
Dim. "D"	N/A 2.500 Inch
Dim. "E"	N/A 1.590 Inch
Dim. "F"	N/A 1.180 Inch
Dim. "G"	N/A 2.110 Inch
Dim. "H"	N/A 1.250 Inch
Dim. "J"	N/A 0.190 Inch
Dim. "K"	N/A 0.310 Inch
Dim. "P"	N/A 0.380 Inch
Dim. "R"	N/A 0.090 Inch
Dim. "S"	N/A 3.937 Inch
Dim. "T"	N/A 3.150 Inch
U Bolt No.	N/A
Dim. "U"	N/A
Dim. "W"	N/A
Dim. "X"	N/A
Dim. "Z"	N/A
Remarks	N/A Clockwise use Left hand pins, CounterClockwise use Right-hand Pins