Riten Industries Inc. - Type 63 / Driving Diameter Range: 1.42 - 2.38 Inch

View Catalog Page The Type 63 Series allows a driving diameter of 1.42 inch to 2.38 inch. This design is generally used in medium roughing operations and can handle loads of up to 3,000 Ibs. The pressure equalization of the driving pins is provided by hydraulic fluid. This permits a seven-degree pitch on the end face of the part. Behind every driving pin is a sealed piston that prevents oil leakage. The oil cavities behind the pistons are interconnected and the whole system is enclosed. This series is available in a taper shank, chuck or flange mount. The flange mount is preferred due to higher stability and increased concentricity capabilities. When using a flange mount design, a spindle adapter and mounting screws are required. The flange mount results in less wear on the machine and machine spindle. The taper shank and chuck mount allow for the face driver to be changed quickly when using the machine for other applications.

Request Information Search by Specification

Unit of Measure

Items	6305-P6401C6301 Offset Pin Style 1.42 Inch (in) Driving Diameter, 1710 Pound (lbs) Tail Stock Force, and 0.393 to 0.511 Inch (in) Center Hole Diameter Range Face Driver	6305-P6401C6302 Offset Pin Style 1.42 Inch (in) Driving Diameter, 1710 Pound (lbs) Tail Stock Force, and 0.511 to 0.629 Inch (in) Center Hole Diameter Range Face Driver	6305-P6401C6303 Offset Pin Style 1.42 Inch (in) Driving Diameter, 1710 Pound (lbs) Tail Stock Force, and 0.629 to 0.748 Inch (in) Center Hole Diameter Range Face Driver	6305-P6401C6304 Offset Pin Style 1.42 Inch (in) Driving Diameter, 1710 Pound (lbs) Tail Stock Force, and 0.748 to 0.866 Inch (in) Center Hole Diameter Range Face Driver	6305-P6401C6305 Offset Pin Style 1.42 Inch (in) Driving Diameter, 1710 Pound (lbs) Tail Stock Force, and 0.866 to 0.984 Inch (in) Center Hole Diameter Range Face Driver
Tool Series/Type	N/A 63
Design Type	N/A Hydraulic, TIR greater than .0015
Mounting Style	N/A 5
Drive Pin Part #	N/A P6401
Pin Style	N/A Offset
Driving Diameter	N/A 1.420 Inch
Rotation	N/A Counterclockwise
No. of Pin	N/A 5
Driving Diameter Ranges "G"	N/A 1.42 - 2.38 Inch
Min. Raw Stock Size Range "S"	N/A 1.430 Inch
Max. Raw Stock Size Range "S"	N/A 4.800 Inch
Tail Stock Force	N/A 1710 lbs
Dim. "A"	N/A 5.810 Inch
Dim. "B"	N/A 9.940 Inch
Dim. "C"	N/A 4.810 Inch
Dim. "b"	N/A 20.000 Degree
Dim. "N"	N/A 0.710 Inch
Notes	N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.
Max. Part Weight	N/A 160 lbs
Center Point Part #	N/A C6301	N/A C6302	N/A C6303	N/A C6304	N/A C6305
Center Hole Diameter Range (Inch)	N/A .393 to 0.511	N/A .511 to 0.629	N/A .629 to 0.748	N/A .748 to 0.866	N/A .866 to 0.984
Dim. "a"	N/A 25.000 Degree
Dim. "D"	N/A 4.720 Inch
Dim. "E"	N/A 3.310 Inch
Dim. "F"	N/A 2.750 Inch
Dim. "G"	N/A 2.970 Inch
Dim. "H"	N/A 2.060 Inch
Dim. "J"	N/A 0.340 Inch
Dim. "K"	N/A 0.500 Inch
Dim. "P"	N/A 0.500 Inch
Dim. "R"	N/A 0.280 Inch
Dim. "S"	N/A 5.512 Inch
Dim. "T"	N/A 4.960 Inch
U Bolt No.	N/A
Dim. "U"	N/A
Dim. "W"	N/A
Dim. "X"	N/A
Dim. "Z"	N/A