Riten Industries Inc. - Type 66 / Driving Diameter Range: 3.24 - 4.33 Inch

View Catalog Page The Type 66 Series allows a driving diameter of 3.24 inch to 4.33 inch. This design is generally used in medium roughing operations and can handle loads of up to 3,000 Ibs. The pressure equalization of the driving pins is provided by hydraulic fluid. This permits a seven-degree pitch on the end face of the part. Behind every driving pin is a sealed piston that prevents oil leakage. The oil cavities behind the pistons are interconnected and the whole system is enclosed. This series is available in a taper shank, chuck or flange mount. The flange mount is preferred due to higher stability and increased concentricity capabilities. When using a flange mount design, a spindle adapter and mounting screws are required. The flange mount results in less wear on the machine and machine spindle. The taper shank and chuck mount allow for the face driver to be changed quickly when using the machine for other applications.

Request Information Search by Specification

Unit of Measure

Items	6606-P6801C6601 Offset Pin Style 3.24 Inch (in) Driving Diameter, 3650 Pound (lbs) Tail Stock Force, and 0.472 to 0.787 Inch (in) Center Hole Diameter Range Face Driver	6606-P6801C6602 Offset Pin Style 3.24 Inch (in) Driving Diameter, 3650 Pound (lbs) Tail Stock Force, and 0.787 to 1.102 Inch (in) Center Hole Diameter Range Face Driver	6606-P6801C6603 Offset Pin Style 3.24 Inch (in) Driving Diameter, 3650 Pound (lbs) Tail Stock Force, and 1.102 to 1.417 Inch (in) Center Hole Diameter Range Face Driver	6606-P6801C6604 Offset Pin Style 3.24 Inch (in) Driving Diameter, 3650 Pound (lbs) Tail Stock Force, and 1.417 to 1.732 Inch (in) Center Hole Diameter Range Face Driver	6606-P6801C6605 Offset Pin Style 3.24 Inch (in) Driving Diameter, 3650 Pound (lbs) Tail Stock Force, and 1.732 to 2.047 Inch (in) Center Hole Diameter Range Face Driver
Tool Series/Type	N/A 66
Design Type	N/A Hydraulic, TIR greater than .0015
Mounting Style	N/A 6
Drive Pin Part #	N/A P6801
Pin Style	N/A Offset
Driving Diameter	N/A 3.240 Inch
Rotation	N/A Counterclockwise
No. of Pin	N/A 8
Driving Diameter Ranges "G"	N/A 3.24 - 4.33 Inch
Min. Raw Stock Size Range "S"	N/A 3.250 Inch
Max. Raw Stock Size Range "S"	N/A 6.490 Inch
Tail Stock Force	N/A 3650 lbs
Dim. "A"	N/A 6.900 Inch
Dim. "B"	N/A 12.160 Inch
Dim. "C"	N/A 4.810 Inch
Dim. "b"	N/A 30.000 Degree
Dim. "N"	N/A 1.180 Inch
Notes	N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.
Max. Part Weight	N/A 375 lbs
Center Point Part #	N/A C6601	N/A C6602	N/A C6603	N/A C6604	N/A C6605
Center Hole Diameter Range (Inch)	N/A .472 to 0.787	N/A .787 to 1.102	N/A 1.102 to 1.417	N/A 1.417 to 1.732	N/A 1.732 to 2.047
Dim. "a"	N/A 15.000 Degree
Dim. "D"	N/A 6.140 Inch
Dim. "E"	N/A 5.270 Inch
Dim. "F"	N/A 4.630 Inch
Dim. "G"	N/A 3.970 Inch
Dim. "H"	N/A 3.130 Inch
Dim. "J"	N/A 0.470 Inch
Dim. "K"	N/A 0.840 Inch
Dim. "P"	N/A 0.440 Inch
Dim. "R"	N/A 0.160 Inch
Dim. "S"	N/A 5.512 Inch
Dim. "T"	N/A 6.220 Inch
U Bolt No.	N/A
Dim. "U"	N/A
Dim. "W"	N/A