Riten Industries Inc. - Type 68 / Driving Diameter Range: 4.66 - 5.74 Inch

View Catalog Page The Type 68 Series allows a driving diameter of 4.66 inch to 5.74 inch. This design is generally used in medium roughing operations and can handle loads of up to 3,000 Ibs. The pressure equalization of the driving pins is provided by hydraulic fluid. This permits a seven-degree pitch on the end face of the part. Behind every driving pin is a sealed piston that prevents oil leakage. The oil cavities behind the pistons are interconnected and the whole system is enclosed. This series is available in a taper shank, chuck or flange mount. The flange mount is preferred due to higher stability and increased concentricity capabilities. When using a flange mount design, a spindle adapter and mounting screws are required. The flange mount results in less wear on the machine and machine spindle. The taper shank and chuck mount allow for the face driver to be changed quickly when using the machine for other applications.

Request Information Search by Specification

Unit of Measure

Items	68F1-P6801C6801 Offset Pin Style 4.66 Inch (in) Driving Diameter, 0.629 to 0.984 Inch (in) Center Hole Diameter Range, and 4560 Pound (lbs) Tail Stock Force Face Driver	68F1-P6801C6802 Offset Pin Style 4.66 Inch (in) Driving Diameter, 0.984 to 1.338 Inch (in) Center Hole Diameter Range, and 4560 Pound (lbs) Tail Stock Force Face Driver	68F1-P6801C6803 Offset Pin Style 4.66 Inch (in) Driving Diameter, 1.338 to 1.692 Inch (in) Center Hole Diameter Range, and 4560 Pound (lbs) Tail Stock Force Face Driver	68F1-P6801C6804 Offset Pin Style 4.66 Inch (in) Driving Diameter, 1.692 to 2.047 Inch (in) Center Hole Diameter Range, and 4560 Pound (lbs) Tail Stock Force Face Driver	68F1-P6801C6805 Offset Pin Style 4.66 Inch (in) Driving Diameter, 2.047 to 2.401 Inch (in) Center Hole Diameter Range, and 4560 Pound (lbs) Tail Stock Force Face Driver
Tool Series/Type	N/A 68
Design Type	N/A Hydraulic, TIR greater than .0015
Mounting Style	N/A Flange Mount
Drive Pin Part #	N/A P6801
Pin Style	N/A Offset
Driving Diameter	N/A 4.660 Inch
Rotation	N/A Counterclockwise
No. of Pin	N/A 10
Driving Diameter Ranges "G"	N/A 4.66 - 5.74 Inch
Min. Raw Stock Size Range "S"	N/A 4.670 Inch
Max. Raw Stock Size Range "S"	N/A 8.590 Inch
Tail Stock Force	N/A 4560 lbs
Dim. "A"	N/A 6.590 Inch
Dim. "B"	N/A 11.250 Inch
Dim. "C"	N/A 8.250 Inch
Dim. "b"	N/A 30.000 Degree
Dim. "N"	N/A 1.570 Inch
Notes	N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.
Max. Part Weight	N/A 600 lbs
Center Point Part #	N/A C6801	N/A C6802	N/A C6803	N/A C6804	N/A C6805
Center Hole Diameter Range (Inch)	N/A .629 to 0.984	N/A .984 to 1.338	N/A 1.338 to 1.692	N/A 1.692 to 2.047	N/A 2.047 to 2.401
Dim. "a"	N/A 15.000 Degree
Dim. "D"	N/A 8.190 Inch
Dim. "E"	N/A 6.630 Inch
Dim. "F"	N/A 6.050 Inch
Dim. "G"	N/A 4.340 Inch
Dim. "H"	N/A 3.280 Inch
Dim. "J"	N/A 0.390 Inch
Dim. "K"	N/A 1.030 Inch
Dim. "P"	N/A 0.340 Inch
Dim. "R"	N/A 0.160 Inch
Dim. "S"	N/A 6.694 Inch
Dim. "T"	N/A 7.323 Inch
U Bolt No.	N/A 8
Dim. "U"	N/A 0.422 Inch
Dim. "W"	N/A 2.220 Inch