The Type 42 Series allows a driving diameter of 0.43" to 0.79". The driving pins move independently to allow a five-degree pitch of the end face of the work-piece. The mechanical compensation and lock down center point allow a constant length to be held from center to the taper. The Type 42 Series is available in 3, 4,and 5 morse taper designs as well as a flange mount. Chuck mounting can be achieved as described in the mounting procedures. View Catalog Page
Unit of Measure
Items
Mechanical Design - Morse Taper Drivers

Offset Pin Style Counterclockwise 3 Mounting Style and 0 to 0.24 Inch (in) Center Hole Diameter Range Face Driver

Mechanical Design - Morse Taper Drivers

Offset Pin Style Counterclockwise 3 Mounting Style and 0.217 to 0.307 Inch (in) Center Hole Diameter Range Face Driver

Mechanical Design - Morse Taper Drivers

Offset Pin Style Counterclockwise 3 Mounting Style and 0.295 to 0.394 Inch (in) Center Hole Diameter Range Face Driver

Mechanical Design - Morse Taper Drivers

Offset Pin Style Counterclockwise 3 Mounting Style and 0.335 to 0.472 Inch (in) Center Hole Diameter Range Face Driver

Mechanical Design - Morse Taper Drivers

Offset Pin Style Counterclockwise 3 Mounting Style and 0.453 to 0.551 Inch (in) Center Hole Diameter Range Face Driver
Tool Series/Type N/A 42
Design Type N/A Mechanical, TIR less than .001
Mounting Style N/A 3
MOUNT N/A 03
Drive Pin Part # N/A P4201
Pin Style N/A Offset
STYLE N/A 1
Driving Diameter N/A 0.430 Inch
Rotation N/A Counterclockwise
ROTAT N/A R
No. of Pin N/A 3
Pin Edge Length "L" N/A 0.06 Inch
Center Point Part # N/A C4201 N/A C4202 N/A C4203 N/A C4204 N/A C4205
Center Hole Diameter Range (Inch) N/A 0 to .24 N/A .217 to 0.307 N/A .295 to .394 N/A .335 to .472 N/A .453 to .551
Driving Diameter Ranges "G" N/A 0.43 - 0.79 Inch
Min. Raw Stock Size Range "S" N/A 0.472 Inch
Max. Raw Stock Size Range "S" N/A 1.580 Inch
Tail Stock Force N/A 700 lbs
Dim. "A" N/A 3.150 Inch
Dim. "B" N/A 5.550 Inch
Dim. "C" N/A 1.650 Inch
Dim. "b" N/A 60.000 Degree
Dim. "N" N/A 0.240 Inch
Notes N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter. N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter. N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter. N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter. N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.
Remarks N/A Clockwise use Left hand pins, CounterClockwise use Right-hand Pins
© 2019 Riten Industries, Inc. All Rights Reserved / Privacy Policy