Riten Industries Inc. - Type 45 / Driving Diameter Range: 1.34 - 1.73 Inch

The Type 45 Series allows a driving diameter of 1.34" to 1.73". The driving pins move independently to allow a five-degree pitch of the end face of the work-piece. The mechanical compensation and lock down center point allow a constant length to be held from center to the taper. The Type 45 Series is available in 4 and 5 morse taper designs as well as a flange mount. Chuck mounting can be achieved as described in the mounting procedures. View Catalog Page

Request Information Search by Specification

Unit of Measure

Items	4504-P4501C4501 Offset Pin Style Counterclockwise 4 Mounting Style and 0.08 to 0.71 Inch (in) Center Hole Diameter Range Face Driver	4504-P4501C4502 Offset Pin Style Counterclockwise 4 Mounting Style and 0.669 to 0.866 Inch (in) Center Hole Diameter Range Face Driver	4504-P4501C4503 Offset Pin Style Counterclockwise 4 Mounting Style and 0.828 to 1.024 Inch (in) Center Hole Diameter Range Face Driver	4504-P4501C4504 Offset Pin Style Counterclockwise 4 Mounting Style and 0.984 to 1.181 Inch (in) Center Hole Diameter Range Face Driver	4504-P4501C4505 Offset Pin Style Counterclockwise 4 Mounting Style and 1.142 to 1.339 Inch (in) Center Hole Diameter Range Face Driver
Tool Series/Type	N/A 45
Design Type	N/A Mechanical, TIR less than .001
Mounting Style	N/A 4
MOUNT	N/A 04
Drive Pin Part #	N/A P4501
Pin Style	N/A Offset
STYLE	N/A 1
Driving Diameter	N/A 1.340 Inch
Rotation	N/A Counterclockwise
ROTAT	N/A R
No. of Pin	N/A 6
Pin Edge Length "L"	N/A 0.20 Inch
Center Point Part #	N/A C4501	N/A C4502	N/A C4503	N/A C4504	N/A C4505
Center Hole Diameter Range (Inch)	N/A .08 to .71	N/A .669 to .866	N/A .828 to 1.024	N/A .984 to 1.181	N/A 1.142 to 1.339
Driving Diameter Ranges "G"	N/A 1.34 - 1.73 Inch
Min. Raw Stock Size Range "S"	N/A 1.378 Inch
Max. Raw Stock Size Range "S"	N/A 3.460 Inch
Tail Stock Force	N/A 2100 lbs
Dim. "A"	N/A 3.150 Inch
Dim. "B"	N/A 6.060 Inch
Dim. "C"	N/A 2.760 Inch
Dim. "b"	N/A 60.000 Degree
Dim. "N"	N/A 0.710 Inch
Notes	N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.	N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.	N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.	N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.	N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.
Remarks	N/A Clockwise use Left hand pins, CounterClockwise use Right-hand Pins