Riten Industries Inc. - Type 46 / Driving Diameter Range: 1.14 - 1.93 Inch

The Type 46 Series allows a driving diameter of 1.14" to 1.93". The driving pins move independently to allow a five-degree pitch of the end face of the work-piece. The mechanical compensation and lock down center point allow a constant length to be held from center to the taper. The Type 46 Series is available in a flange mount. Chuck mounting can be achieved as described in the mounting procedures. View Catalog Page

Request Information Search by Specification

Unit of Measure

Items	46FM-P4601C4601 Offset Pin Style Counterclockwise 0.08 to 0.55 Inch (in) Center Hole Diameter Range Face Driver	46FM-P4601C4602 Offset Pin Style Counterclockwise 0.512 to 0.709 Inch (in) Center Hole Diameter Range Face Driver	46FM-P4601C4603 Offset Pin Style Counterclockwise 0.669 to 0.866 Inch (in) Center Hole Diameter Range Face Driver	46FM-P4601C4604 Offset Pin Style Counterclockwise 0.828 to 1.024 Inch (in) Center Hole Diameter Range Face Driver	46FM-P4601C4605 Offset Pin Style Counterclockwise 0.984 to 1.181 Inch (in) Center Hole Diameter Range Face Driver
Tool Series/Type	N/A 46
Design Type	N/A Mechanical, TIR less than .001
Mounting Style	N/A Flange Mount
MOUNT	N/A FM
Drive Pin Part #	N/A P4601
Pin Style	N/A Offset
STYLE	N/A 1
Driving Diameter	N/A 1.140 Inch
Rotation	N/A Counterclockwise
ROTAT	N/A R
No. of Pin	N/A 6
Pin Edge Length "L"	N/A 0.20 Inch
Center Point Part #	N/A C4601	N/A C4602	N/A C4603	N/A C4604	N/A C4605
Center Hole Diameter Range (Inch)	N/A .08 to .55	N/A .512 to .709	N/A .669 to .866	N/A .828 to 1.024	N/A .984 to 1.181
Driving Diameter Ranges "G"	N/A 1.14 - 1.93 Inch
Min. Raw Stock Size Range "S"	N/A 1.810 Inch
Max. Raw Stock Size Range "S"	N/A 3.860 Inch
Tail Stock Force	N/A 2780 lbs
Dim. "A"	N/A 4.528 Inch
Dim. "B"	N/A 6.098 Inch
Dim. "C"	N/A 3.150 Inch
Dim. "b"	N/A 60.000 Degree
Dim. "N"	N/A 0.550 Inch
Notes	N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.	N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.	N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.	N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.	N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.
Remarks	N/A Clockwise use Left hand pins, CounterClockwise use Right-hand Pins