Riten Industries Inc. - Type 47 / Driving Diameter Range: 1.54 - 2.32 Inch

The Type 47 Series allows a driving diameter of 1.54" to 2.32". The driving pins move independently to allow a five-degree pitch of the end face of the work-piece. The mechanical compensation and lock down center point allow a constant length to be held from center to the taper. The Type 47 Series is available in 5 and 6 morse taper designs as well as a flange mount. Chuck mounting can be achieved as described in the mounting procedures. View Catalog Page

Request Information Search by Specification

Unit of Measure

Items	4705-P4701C4701 Offset Pin Style Counterclockwise 5 Mounting Style and 0.12 to 0.95 Inch (in) Center Hole Diameter Range Face Driver	4705-P4701C4702 Offset Pin Style Counterclockwise 5 Mounting Style and 0.906 to 1.102 Inch (in) Center Hole Diameter Range Face Driver	4705-P4701C4703 Offset Pin Style Counterclockwise 5 Mounting Style and 1.063 to 1.260 Inch (in) Center Hole Diameter Range Face Driver	4705-P4701C4704 Offset Pin Style Counterclockwise 5 Mounting Style and 1.220 to 1.417 Inch (in) Center Hole Diameter Range Face Driver	4705-P4701C4705 Offset Pin Style Counterclockwise 5 Mounting Style and 1.378 to 1.575 Inch (in) Center Hole Diameter Range Face Driver
Tool Series/Type	N/A 47
Design Type	N/A Mechanical, TIR less than .001
Mounting Style	N/A 5
MOUNT	N/A 05
Drive Pin Part #	N/A P4701
Pin Style	N/A Offset
STYLE	N/A 1
Driving Diameter	N/A 1.540 Inch
Rotation	N/A Counterclockwise
ROTAT	N/A R
No. of Pin	N/A 6
Pin Edge Length "L"	N/A 0.20 Inch
Center Point Part #	N/A C4701	N/A C4702	N/A C4703	N/A C4704	N/A C4705
Center Hole Diameter Range (Inch)	N/A .12 to .95	N/A .906 to 1.102	N/A 1.063 to 1.260	N/A 1.220 to 1.417	N/A 1.378 to 1.575
Driving Diameter Ranges "G"	N/A 1.54 - 2.32 Inch
Min. Raw Stock Size Range "S"	N/A 1.575 Inch
Max. Raw Stock Size Range "S"	N/A 4.640 Inch
Tail Stock Force	N/A 3300 lbs
Dim. "A"	N/A 4.130 Inch
Dim. "B"	N/A 7.950 Inch
Dim. "C"	N/A 3.540 Inch
Dim. "b"	N/A 60.000 Degree
Dim. "N"	N/A 0.940 Inch
Notes	N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.	N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.	N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.	N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.	N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.
Remarks	N/A Clockwise use Left hand pins, CounterClockwise use Right-hand Pins