Riten Industries Inc. - Type 48 / Driving Diameter Range: 1.93 - 2.72 Inch

The Type 48 Series allows a driving diameter of 1.93" to 2.72". The driving pins move independently to allow a five-degree pitch of the end face of the work-piece. The mechanical compensation and lock down center point allow a constant length to be held from center to the taper. The Type 48 Series is available in a flange mount. Chuck mounting can be achieved as described in the mounting procedures. View Catalog Page

Request Information Search by Specification

Unit of Measure

Items	48FM-P4801C4801 Offset Pin Style 0.12 to 1.10 Inch (in) Center Hole Diameter Range Face Driver	48FM-P4801C4802 Offset Pin Style 1.063 to 1.260 Inch (in) Center Hole Diameter Range Face Driver	48FM-P4801C4803 Offset Pin Style 1.220 to 1.417 Inch (in) Center Hole Diameter Range Face Driver	48FM-P4801C4804 Offset Pin Style 1.378 to 1.575 Inch (in) Center Hole Diameter Range Face Driver	48FM-P4801C4805 Offset Pin Style 1.535 to 1.732 Inch (in) Center Hole Diameter Range Face Driver
Tool Series/Type	N/A 48
Design Type	N/A Mechanical, TIR less than .001
Mounting Style	N/A Flange Mount
MOUNT	N/A FM
Drive Pin Part #	N/A P4801
Pin Style	N/A Offset
STYLE	N/A 1
Driving Diameter	N/A 1.930 Inch
Rotation	N/A Counterclockwise
ROTAT	N/A R
No. of Pin	N/A 6
Pin Edge Length "L"	N/A 0.20 Inch
Center Point Part #	N/A C4801	N/A C4802	N/A C4803	N/A C4804	N/A C4805
Center Hole Diameter Range (Inch)	N/A .12 to 1.10	N/A 1.063 to 1.260	N/A 1.220 to 1.417	N/A 1.378 to 1.575	N/A 1.535 to 1.732
Driving Diameter Ranges "G"	N/A 1.93 - 2.72 Inch
Min. Raw Stock Size Range "S"	N/A 1.969 Inch
Max. Raw Stock Size Range "S"	N/A 5.440 Inch
Tail Stock Force	N/A 3500 lbs
Dim. "A"	N/A 4.528 Inch
Dim. "B"	N/A 7.668 Inch
Dim. "C"	N/A 3.940 Inch
Dim. "b"	N/A 60.000 Degree
Dim. "N"	N/A 1.100 Inch
Notes	N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.	N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.	N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.	N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.	N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.
Remarks	N/A Clockwise use Left hand pins, CounterClockwise use Right-hand Pins