Riten Industries Inc. - Type 62 / Driving Diameter Range: 0.94 - 1.73 Inch

View Catalog Page The Type 62 Series allows a driving diameter of 0.94 inch to 1.73 inch. This design is generally used in medium roughing operations and can handle loads of up to 3,000 Ibs. The pressure equalization of the driving pins is provided by hydraulic fluid. This permits a seven-degree pitch on the end face of the part. Behind every driving pin is a sealed piston that prevents oil leakage. The oil cavities behind the pistons are interconnected and the whole system is enclosed. This series is available in a taper shank, chuck or flange mount. The flange mount is preferred due to higher stability and increased concentricity capabilities. When using a flange mount design, a spindle adapter and mounting screws are required. The flange mount results in less wear on the machine and machine spindle. The taper shank and chuck mount allow for the face driver to be changed quickly when using the machine for other applications.

Unit of Measure

Items	6204-P6201C6201 Offset Pin Style 0.94 Inch (in) Driving Diameter, 1140 Pound (lbs) Tail Stock Force, and 0.275 to 0.393 Inch (in) Center Hole Diameter Range Face Driver	6204-P6201C6202 Offset Pin Style 0.94 Inch (in) Driving Diameter, 1140 Pound (lbs) Tail Stock Force, and 0.393 to 0.511 Inch (in) Center Hole Diameter Range Face Driver	6204-P6201C6203 Offset Pin Style 0.94 Inch (in) Driving Diameter, 1140 Pound (lbs) Tail Stock Force, and 0.511 to 0.629 Inch (in) Center Hole Diameter Range Face Driver	6204-P6201C6204 Offset Pin Style 0.94 Inch (in) Driving Diameter, 1140 Pound (lbs) Tail Stock Force, and 0.629 to 0.748 Inch (in) Center Hole Diameter Range Face Driver	6204-P6201C6205 Offset Pin Style 0.94 Inch (in) Driving Diameter, 1140 Pound (lbs) Tail Stock Force, and 0.748 to 0.866 Inch (in) Center Hole Diameter Range Face Driver
Tool Series/Type	N/A 62
Design Type	N/A Hydraulic, TIR greater than .0015
Mounting Style	N/A 4
Drive Pin Part #	N/A P6201
Pin Style	N/A Offset
Driving Diameter	N/A 0.940 Inch
Rotation	N/A Counterclockwise
No. of Pin	N/A 5
Driving Diameter Ranges "G"	N/A 0.94 - 1.73 Inch
Min. Raw Stock Size Range "S"	N/A 0.950 Inch
Max. Raw Stock Size Range "S"	N/A 3.420 Inch
Tail Stock Force	N/A 1140 lbs
Dim. "A"	N/A 4.380 Inch
Dim. "B"	N/A 8.030 Inch
Dim. "C"	N/A 3.250 Inch
Dim. "b"	N/A 15.000 Degree
Dim. "N"	N/A 0.470 Inch
Notes	N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.
Max. Part Weight	N/A 84 lbs
Center Point Part #	N/A C6201	N/A C6202	N/A C6203	N/A C6204	N/A C6205
Center Hole Diameter Range (Inch)	N/A .275 to 0.393	N/A .393 to 0.511	N/A .511 to 0.629	N/A .629 to 0.748	N/A .748 to 0.866
Dim. "a"	N/A 15.000 Degree
Dim. "D"	N/A 3.160 Inch
Dim. "E"	N/A 2.500 Inch
Dim. "F"	N/A 2.080 Inch
Dim. "G"	N/A 2.310 Inch
Dim. "H"	N/A 1.590 Inch
Dim. "J"	N/A 0.250 Inch
Dim. "K"	N/A 0.400 Inch
Dim. "P"	N/A 0.580 Inch
Dim. "R"	N/A 0.160 Inch
Dim. "S"	N/A 3.937 Inch
Dim. "T"	N/A 3.150 Inch
U Bolt No.	N/A
Dim. "U"	N/A
Dim. "W"	N/A
Dim. "X"	N/A
Dim. "Z"	N/A