Riten Industries, Inc.
1100 Lakeview Avenue
Washington Court House,OH,43160 0340,US
Phone: 740-335-5353 • Fax: 740-335-4622
Email: info@riten.com • Website: http://www.riten.com

Print Back
The Type 40 Series allows a driving diameter of 0.32" to 0.67". The driving pins move independently to allow a five-degree pitch of the end face of the work-piece. The mechanical compensation and lock down center point allow a constant length to be held from center to the taper. The Type 40 Series is available in 3, 4,and 5 morse taper designs as well as a flange mount. Chuck mounting can be achieved as described in the mounting procedures.View Catalog Page
Mechanical Design - Morse Taper Drivers
Unit of Measure
Items Mechanical Design - Morse Taper Drivers
4003-P4001C4001
Offset Pin Style Counterclockwise 3 Mounting Style Face Driver 		Mechanical Design - Morse Taper Drivers
4003-P4002C4001
Offset Pin Style Clockwise 3 Mounting Style Face Driver 		Mechanical Design - Morse Taper Drivers
4003-P4003C4001
Half Offset Pin Style Counterclockwise 3 Mounting Style Face Driver 		Mechanical Design - Morse Taper Drivers
4003-P4004C4001
Half Offset Pin Style Clockwise 3 Mounting Style Face Driver 		Mechanical Design - Morse Taper Drivers
4003-P4005C4001
Full Width Pin Style Counterclockwise 3 Mounting Style Face Driver
Tool Series/Type N/A 40
Design Type N/A Mechanical, TIR less than .001
Mounting Style N/A 3
MOUNT N/A 03
Drive Pin Part # N/A P4001 N/A P4002 N/A P4003 N/A P4004 N/A P4005
Pin Style N/A Offset N/A Offset N/A Half Offset N/A Half Offset N/A Full Width
STYLE N/A 1 N/A 1 N/A 2 N/A 2 N/A 3
Driving Diameter N/A 0.320 Inch N/A 0.320 Inch N/A 0.430 Inch N/A 0.430 Inch N/A 0.670 Inch
Rotation N/A Counterclockwise N/A Clockwise N/A Counterclockwise N/A Clockwise N/A Counterclockwise
ROTAT N/A R N/A L N/A R N/A L N/A R
No. of Pin N/A 3
Pin Edge Length "L" N/A 0.06 Inch N/A 0.06 Inch N/A 0.12 Inch N/A 0.12 Inch N/A 0.24 Inch
Center Point Part # N/A C4001
Center Hole Diameter Range (Inch) N/A 0 to .20
Driving Diameter Ranges "G" N/A 0.32 - 0.67 Inch
Min. Raw Stock Size Range "S" N/A 0.354 Inch
Max. Raw Stock Size Range "S" N/A 1.340 Inch
Tail Stock Force N/A 680 lbs N/A 680 lbs N/A 720 lbs N/A 720 lbs N/A 800 lbs
Dim. "A" N/A 3.430 Inch
Dim. "B" N/A 5.830 Inch
Dim. "C" N/A 1.890 Inch
Dim. "b" N/A 60.000 Degree
Dim. "N" N/A 0.870 Inch
Notes N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.