Riten Industries, Inc.
1100 Lakeview Avenue
Washington Court House,OH,43160 0340,US
Phone: 740-335-5353 • Fax: 740-335-4622
Email: info@riten.com • Website: http://www.riten.com

Print Back
The Type 43 Series allows a driving diameter of 0.51" to 1.02". The driving pins move independently to allow a five-degree pitch of the end face of the work-piece. The mechanical compensation and lock down center point allow a constant length to be held from center to the taper. The Type 43 Series is available in 3, 4,and 5 morse taper designs as well as a flange mount. Chuck mounting can be achieved as described in the mounting procedures. View Catalog Page
Mechanical Design - Morse Taper Drivers
Unit of Measure
Items Mechanical Design - Morse Taper Drivers
4303-P4301C4301
Offset Pin Style Counterclockwise 3 Mounting Style and 0 to 0.32 Inch (in) Center Hole Diameter Range Face Driver 		Mechanical Design - Morse Taper Drivers
4303-P4301C4302
Offset Pin Style Counterclockwise 3 Mounting Style and 0.256 to 0.386 Inch (in) Center Hole Diameter Range Face Driver 		Mechanical Design - Morse Taper Drivers
4303-P4301C4303
Offset Pin Style Counterclockwise 3 Mounting Style and 0.335 to 0.472 Inch (in) Center Hole Diameter Range Face Driver 		Mechanical Design - Morse Taper Drivers
4303-P4301C4304
Offset Pin Style Counterclockwise 3 Mounting Style and 0.453 to 0.591 Inch (in) Center Hole Diameter Range Face Driver 		Mechanical Design - Morse Taper Drivers
4303-P4301C4305
Offset Pin Style Counterclockwise 3 Mounting Style and 0.571 to 0.709 Inch (in) Center Hole Diameter Range Face Driver
Tool Series/Type N/A 43
Design Type N/A Mechanical, TIR less than .001
Mounting Style N/A 3
MOUNT N/A 03
Drive Pin Part # N/A P4301
Pin Style N/A Offset
STYLE N/A 1
Driving Diameter N/A 0.510 Inch
Rotation N/A Counterclockwise
ROTAT N/A R
No. of Pin N/A 3
Pin Edge Length "L" N/A 0.06 Inch
Center Point Part # N/A C4301 N/A C4302 N/A C4303 N/A C4304 N/A C4305
Center Hole Diameter Range (Inch) N/A 0 to .32 N/A .256 to .386 N/A .335 to .472 N/A .453 to .591 N/A .571 to .709
Driving Diameter Ranges "G" N/A 0.51 - 1.02 Inch
Min. Raw Stock Size Range "S" N/A 1.063 Inch
Max. Raw Stock Size Range "S" N/A 2.040 Inch
Tail Stock Force N/A 1000 lbs
Dim. "A" N/A 3.150 Inch
Dim. "B" N/A 5.550 Inch
Dim. "C" N/A 1.890 Inch
Dim. "b" N/A 60.000 Degree
Dim. "N" N/A 0.320 Inch
Notes N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter. N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter. N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter. N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter. N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.
Remarks N/A Clockwise use Left hand pins, CounterClockwise use Right-hand Pins