Riten Industries, Inc.
1100 Lakeview Avenue
Washington Court House,OH,43160 0340,US
Phone: 740-335-5353 • Fax: 740-335-4622
Email: info@riten.com • Website: http://www.riten.com

Print Back
The Type 46 Series allows a driving diameter of 1.14" to 1.93". The driving pins move independently to allow a five-degree pitch of the end face of the work-piece. The mechanical compensation and lock down center point allow a constant length to be held from center to the taper. The Type 46 Series is available in a flange mount. Chuck mounting can be achieved as described in the mounting procedures. View Catalog Page
Mechanical Design - Flange Mount Drivers
Unit of Measure
Items Mechanical Design - Flange Mount Drivers
46FM-P4601C4601
Offset Pin Style Counterclockwise 0.08 to 0.55 Inch (in) Center Hole Diameter Range Face Driver 		Mechanical Design - Flange Mount Drivers
46FM-P4601C4602
Offset Pin Style Counterclockwise 0.512 to 0.709 Inch (in) Center Hole Diameter Range Face Driver 		Mechanical Design - Flange Mount Drivers
46FM-P4601C4603
Offset Pin Style Counterclockwise 0.669 to 0.866 Inch (in) Center Hole Diameter Range Face Driver 		Mechanical Design - Flange Mount Drivers
46FM-P4601C4604
Offset Pin Style Counterclockwise 0.828 to 1.024 Inch (in) Center Hole Diameter Range Face Driver 		Mechanical Design - Flange Mount Drivers
46FM-P4601C4605
Offset Pin Style Counterclockwise 0.984 to 1.181 Inch (in) Center Hole Diameter Range Face Driver
Tool Series/Type N/A 46
Design Type N/A Mechanical, TIR less than .001
Mounting Style N/A Flange Mount
MOUNT N/A FM
Drive Pin Part # N/A P4601
Pin Style N/A Offset
STYLE N/A 1
Driving Diameter N/A 1.140 Inch
Rotation N/A Counterclockwise
ROTAT N/A R
No. of Pin N/A 6
Pin Edge Length "L" N/A 0.20 Inch
Center Point Part # N/A C4601 N/A C4602 N/A C4603 N/A C4604 N/A C4605
Center Hole Diameter Range (Inch) N/A .08 to .55 N/A .512 to .709 N/A .669 to .866 N/A .828 to 1.024 N/A .984 to 1.181
Driving Diameter Ranges "G" N/A 1.14 - 1.93 Inch
Min. Raw Stock Size Range "S" N/A 1.810 Inch
Max. Raw Stock Size Range "S" N/A 3.860 Inch
Tail Stock Force N/A 2780 lbs
Dim. "A" N/A 4.528 Inch
Dim. "B" N/A 6.098 Inch
Dim. "C" N/A 3.150 Inch
Dim. "b" N/A 60.000 Degree
Dim. "N" N/A 0.550 Inch
Notes N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter. N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter. N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter. N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter. N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.
Remarks N/A Clockwise use Left hand pins, CounterClockwise use Right-hand Pins