Riten Industries, Inc.
1100 Lakeview Avenue
Washington Court House,OH,43160 0340,US
Phone: 740-335-5353 • Fax: 740-335-4622
Email: info@riten.com • Website: http://www.riten.com

Print Back
The Type 47 Series allows a driving diameter of 1.54" to 2.32". The driving pins move independently to allow a five-degree pitch of the end face of the work-piece. The mechanical compensation and lock down center point allow a constant length to be held from center to the taper. The Type 47 Series is available in 5 and 6 morse taper designs as well as a flange mount. Chuck mounting can be achieved as described in the mounting procedures. View Catalog Page
Mechanical Design - Morse Taper Drivers
Unit of Measure
Items Mechanical Design - Morse Taper Drivers
4705-P4701C4701
Offset Pin Style Counterclockwise 5 Mounting Style and 0.12 to 0.95 Inch (in) Center Hole Diameter Range Face Driver 		Mechanical Design - Morse Taper Drivers
4705-P4701C4702
Offset Pin Style Counterclockwise 5 Mounting Style and 0.906 to 1.102 Inch (in) Center Hole Diameter Range Face Driver 		Mechanical Design - Morse Taper Drivers
4705-P4701C4703
Offset Pin Style Counterclockwise 5 Mounting Style and 1.063 to 1.260 Inch (in) Center Hole Diameter Range Face Driver 		Mechanical Design - Morse Taper Drivers
4705-P4701C4704
Offset Pin Style Counterclockwise 5 Mounting Style and 1.220 to 1.417 Inch (in) Center Hole Diameter Range Face Driver 		Mechanical Design - Morse Taper Drivers
4705-P4701C4705
Offset Pin Style Counterclockwise 5 Mounting Style and 1.378 to 1.575 Inch (in) Center Hole Diameter Range Face Driver
Tool Series/Type N/A 47
Design Type N/A Mechanical, TIR less than .001
Mounting Style N/A 5
MOUNT N/A 05
Drive Pin Part # N/A P4701
Pin Style N/A Offset
STYLE N/A 1
Driving Diameter N/A 1.540 Inch
Rotation N/A Counterclockwise
ROTAT N/A R
No. of Pin N/A 6
Pin Edge Length "L" N/A 0.20 Inch
Center Point Part # N/A C4701 N/A C4702 N/A C4703 N/A C4704 N/A C4705
Center Hole Diameter Range (Inch) N/A .12 to .95 N/A .906 to 1.102 N/A 1.063 to 1.260 N/A 1.220 to 1.417 N/A 1.378 to 1.575
Driving Diameter Ranges "G" N/A 1.54 - 2.32 Inch
Min. Raw Stock Size Range "S" N/A 1.575 Inch
Max. Raw Stock Size Range "S" N/A 4.640 Inch
Tail Stock Force N/A 3300 lbs
Dim. "A" N/A 4.130 Inch
Dim. "B" N/A 7.950 Inch
Dim. "C" N/A 3.540 Inch
Dim. "b" N/A 60.000 Degree
Dim. "N" N/A 0.940 Inch
Notes N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter. N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter. N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter. N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter. N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.
Remarks N/A Clockwise use Left hand pins, CounterClockwise use Right-hand Pins