Riten Industries, Inc.
1100 Lakeview Avenue
Washington Court House,OH,43160 0340,US
Phone: 740-335-5353 • Fax: 740-335-4622
Email: info@riten.com • Website: http://www.riten.com

Print Back
The Type 49 Series allows a driving diameter of 2.72" to 3.90". The driving pins move independently to allow a five-degree pitch of the end face of the work-piece. The mechanical compensation and lock down center point allow a constant length to be held from center to the taper. The Type 49 Series is available in a flange mount. Chuck mounting can be achieved as described in the mounting procedures. View Catalog Page
Mechanical Design - Flange Mount Drivers
Unit of Measure
Items Mechanical Design - Flange Mount Drivers
49FM-P4901C5101
Offset Pin Style Counterclockwise 0.12 to 1.38 Inch (in) Center Hole Diameter Range Face Driver 		Mechanical Design - Flange Mount Drivers
49FM-P4901C5102
Offset Pin Style Counterclockwise 1.339 to 1.575 Inch (in) Center Hole Diameter Range Face Driver 		Mechanical Design - Flange Mount Drivers
49FM-P4901C5103
Offset Pin Style Counterclockwise 1.535 to 1.772 Inch (in) Center Hole Diameter Range Face Driver 		Mechanical Design - Flange Mount Drivers
49FM-P4901C5104
Offset Pin Style Counterclockwise 1.732 to 1.969 Inch (in) Center Hole Diameter Range Face Driver 		Mechanical Design - Flange Mount Drivers
49FM-P4901C5105
Offset Pin Style Counterclockwise 1.929 to 2.165 Inch (in) Center Hole Diameter Range Face Driver
Tool Series/Type N/A 49
Design Type N/A Mechanical, TIR less than .001
Mounting Style N/A Flange Mount
MOUNT N/A FM
Drive Pin Part # N/A P4901
Pin Style N/A Offset
STYLE N/A 1
Driving Diameter N/A 2.720 Inch
Rotation N/A Counterclockwise
ROTAT N/A R
No. of Pin N/A 6
Pin Edge Length "L" N/A 0.20 Inch
Center Point Part # N/A C5101 N/A C5102 N/A C5103 N/A C5104 N/A C5105
Center Hole Diameter Range (Inch) N/A .12 to 1.38 N/A 1.339 to 1.575 N/A 1.535 to 1.772 N/A 1.732 to 1.969 N/A 1.929 to 2.165
Driving Diameter Ranges "G" N/A 2.72 - 3.90 Inch
Min. Raw Stock Size Range "S" N/A 2.756 Inch
Max. Raw Stock Size Range "S" N/A 7.800 Inch
Tail Stock Force N/A 3700 lbs
Dim. "A" N/A 4.528 Inch
Dim. "B" N/A 7.708 Inch
Dim. "C" N/A 5.200 Inch
Dim. "b" N/A 60.000 Degree
Dim. "N" N/A 1.380 Inch
Notes N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.
Remarks N/A Clockwise use Left hand pins, CounterClockwise use Right-hand Pins