Riten Industries, Inc.
1100 Lakeview Avenue
Washington Court House,OH,43160 0340,US
Phone: 740-335-5353 • Fax: 740-335-4622
Email: info@riten.com • Website: http://www.riten.com

Print Back
View Catalog Page The Type 68 Series allows a driving diameter of 4.66 inch to 5.74 inch. This design is generally used in medium roughing operations and can handle loads of up to 3,000 Ibs. The pressure equalization of the driving pins is provided by hydraulic fluid. This permits a seven-degree pitch on the end face of the part. Behind every driving pin is a sealed piston that prevents oil leakage. The oil cavities behind the pistons are interconnected and the whole system is enclosed. This series is available in a taper shank, chuck or flange mount. The flange mount is preferred due to higher stability and increased concentricity capabilities. When using a flange mount design, a spindle adapter and mounting screws are required. The flange mount results in less wear on the machine and machine spindle. The taper shank and chuck mount allow for the face driver to be changed quickly when using the machine for other applications.
Unit of Measure

Specifications

Tool Series/Type

 N/A 68

Design Type

 N/A Hydraulic, TIR greater than .0015

Mounting Style

 N/A Flange Mount

Drive Pin Part #

 N/A P6804

Pin Style

 N/A Half Offset

Driving Diameter

 N/A 5.740 Inch

Rotation

 N/A Counterclockwise

No. of Pin

 N/A 10

Driving Diameter Ranges "G"

 N/A 4.66 - 5.74 Inch

Min. Raw Stock Size Range "S"

 N/A 4.670 Inch

Max. Raw Stock Size Range "S"

 N/A 8.590 Inch

Tail Stock Force

 N/A 7500 lbs

Dim. "A"

 N/A 6.590 Inch

Dim. "B"

 N/A 11.250 Inch

Dim. "C"

 N/A 8.250 Inch

Dim. "b"

 N/A 30.000 Degree

Dim. "N"

 N/A 1.570 Inch

Notes

 N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.

Max. Part Weight

 N/A 900 lbs

Center Point Part #

 N/A C6803

Center Hole Diameter Range (Inch)

 N/A 1.338 to 1.692

Dim. "a"

 N/A 15.000 Degree

Dim. "D"

 N/A 8.190 Inch

Dim. "E"

 N/A 6.630 Inch

Dim. "F"

 N/A 6.050 Inch

Dim. "G"

 N/A 4.340 Inch

Dim. "H"

 N/A 3.280 Inch

Dim. "J"

 N/A 0.390 Inch

Dim. "K"

 N/A 1.030 Inch

Dim. "P"

 N/A 0.340 Inch

Dim. "R"

 N/A 0.160 Inch

Dim. "S"

 N/A 6.694 Inch

Dim. "T"

 N/A 7.323 Inch

U Bolt No.

 N/A 8

Dim. "U"

 N/A 0.422 Inch

Dim. "W"

 N/A 2.220 Inch