Riten Industries, Inc.
1100 Lakeview Avenue
Washington Court House,OH,43160 0340,US
Phone: 740-335-5353 • Fax: 740-335-4622
Email: info@riten.com • Website: http://www.riten.com

Print Back
The Type 40 Series allows a driving diameter of 0.32" to 0.67". The driving pins move independently to allow a five-degree pitch of the end face of the work-piece. The mechanical compensation and lock down center point allow a constant length to be held from center to the taper. The Type 40 Series is available in 3, 4,and 5 morse taper designs as well as a flange mount. Chuck mounting can be achieved as described in the mounting procedures.View Catalog Page
Unit of Measure

Specifications

Tool Series/Type

 N/A 40

Design Type

 N/A Mechanical, TIR less than .001

Mounting Style

 N/A 4

MOUNT

 N/A 04

Drive Pin Part #

 N/A P4006

Pin Style

 N/A Full Width

STYLE

 N/A 3

Driving Diameter

 N/A 0.670 Inch

Rotation

 N/A Clockwise

ROTAT

 N/A L

No. of Pin

 N/A 3

Pin Edge Length "L"

 N/A 0.24 Inch

Center Point Part #

 N/A C4001

Center Hole Diameter Range (Inch)

 N/A 0 to .20

Driving Diameter Ranges "G"

 N/A 0.32 - 0.67 Inch

Min. Raw Stock Size Range "S"

 N/A 0.354 Inch

Max. Raw Stock Size Range "S"

 N/A 1.340 Inch

Tail Stock Force

 N/A 800 lbs

Dim. "A"

 N/A 3.430 Inch

Dim. "B"

 N/A 6.340 Inch

Dim. "C"

 N/A 1.890 Inch

Dim. "b"

 N/A 60.000 Degree

Dim. "N"

 N/A 0.870 Inch

Notes

 N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.