Riten Industries, Inc.
1100 Lakeview Avenue
Washington Court House,OH,43160 0340,US
Phone: 740-335-5353 • Fax: 740-335-4622
Email: info@riten.com • Website: http://www.riten.com

Print Back
The Type 41 Series allows a driving diameter of 0.24" to 0.75". The driving pins move independently to allow a five-degree pitch of the end face of the work-piece. The mechanical compensation and lock down center point allow a constant length to be held from center to the taper. The Type 41 Series is available in 3, 4,and 5 morse taper designs as well as a flange mount. Chuck mounting can be achieved as described in the mounting procedures. View Catalog Page
Unit of Measure

Specifications

Tool Series/Type

 N/A 41

Design Type

 N/A Mechanical, TIR less than .001

Mounting Style

 N/A 3

MOUNT

 N/A 03

Drive Pin Part #

 N/A P4102

Pin Style

 N/A Offset

STYLE

 N/A 1

Driving Diameter

 N/A 0.240 Inch

Rotation

 N/A Clockwise

ROTAT

 N/A L

No. of Pin

 N/A 3

Pin Edge Length "L"

 N/A 0.06 Inch

Center Point Part #

 N/A C4101

Center Hole Diameter Range (Inch)

 N/A 0 to .12

Driving Diameter Ranges "G"

 N/A 0.24 - 0.75 Inch

Min. Raw Stock Size Range "S"

 N/A 0.276 Inch

Max. Raw Stock Size Range "S"

 N/A 1.500 Inch

Tail Stock Force

 N/A 680 lbs

Dim. "A"

 N/A 3.430 Inch

Dim. "B"

 N/A 5.830 Inch

Dim. "C"

 N/A 1.890 Inch

Dim. "b"

 N/A 60.000 Degree

Dim. "N"

 N/A 0.870 Inch

Notes

 N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.