Item # 4405-P4403C4601, Half Offset Pin Style Counterclockwise 5 Mounting Style and 0.08 to 0.55 Inch (in) Center Hole Diameter Range Face Driver On Riten Industries Inc.

The Type 44 Series allows a driving diameter of 1.02" to 1.42". The driving pins move independently to allow a five-degree pitch of the end face of the work-piece. The mechanical compensation and lock down center point allow a constant length to be held from center to the taper. The Type 44 Series is available in 4 and 5 morse taper designs as well as a flange mount. Chuck mounting can be achieved as described in the mounting procedures. View Catalog Page

Unit of Measure

Specifications

Tool Series/Type	N/A 44
Design Type	N/A Mechanical, TIR less than .001
Mounting Style	N/A 5
MOUNT	N/A 05
Drive Pin Part #	N/A P4403
Pin Style	N/A Half Offset
STYLE	N/A 2
Driving Diameter	N/A 1.220 Inch
Rotation	N/A Counterclockwise
ROTAT	N/A R
No. of Pin	N/A 6
Pin Edge Length "L"	N/A 0.30 Inch
Center Point Part #	N/A C4601
Center Hole Diameter Range (Inch)	N/A .08 to .55
Driving Diameter Ranges "G"	N/A 1.02 - 1.42 Inch
Min. Raw Stock Size Range "S"	N/A 0.552 Inch
Max. Raw Stock Size Range "S"	N/A 2.840 Inch
Tail Stock Force	N/A 2140 lbs
Dim. "A"	N/A 3.150 Inch
Dim. "B"	N/A 6.970 Inch
Dim. "C"	N/A 2.760 Inch
Dim. "b"	N/A 60.000 Degree
Dim. "N"	N/A 0.550 Inch
Notes	N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.
Remarks	N/A Clockwise use Left hand pins, CounterClockwise use Right-hand Pins

Specifications

Tool Series/Type

Design Type

Mounting Style

MOUNT

Drive Pin Part #

Pin Style

STYLE

Driving Diameter

Rotation

ROTAT

No. of Pin

Pin Edge Length "L"

Center Point Part #

Center Hole Diameter Range (Inch)

Driving Diameter Ranges "G"

Min. Raw Stock Size Range "S"

Max. Raw Stock Size Range "S"

Tail Stock Force

Dim. "A"

Dim. "B"

Dim. "C"

Dim. "b"

Dim. "N"

Notes

Remarks