Riten Industries, Inc.
1100 Lakeview Avenue
Washington Court House,OH,43160 0340,US
Phone: 740-335-5353 • Fax: 740-335-4622
Email: info@riten.com • Website: http://www.riten.com

Print Back
The Type 47 Series allows a driving diameter of 1.54" to 2.32". The driving pins move independently to allow a five-degree pitch of the end face of the work-piece. The mechanical compensation and lock down center point allow a constant length to be held from center to the taper. The Type 47 Series is available in 5 and 6 morse taper designs as well as a flange mount. Chuck mounting can be achieved as described in the mounting procedures. View Catalog Page
Unit of Measure

Specifications

Tool Series/Type

 N/A 47

Design Type

 N/A Mechanical, TIR less than .001

Mounting Style

 N/A 6

MOUNT

 N/A 06

Drive Pin Part #

 N/A P4704

Pin Style

 N/A Half Offset

STYLE

 N/A 2

Driving Diameter

 N/A 1.930 Inch

Rotation

 N/A Clockwise

ROTAT

 N/A L

No. of Pin

 N/A 6

Pin Edge Length "L"

 N/A 0.39 Inch

Center Point Part #

 N/A C4705

Center Hole Diameter Range (Inch)

 N/A 1.378 to 1.575

Driving Diameter Ranges "G"

 N/A 1.54 - 2.32 Inch

Min. Raw Stock Size Range "S"

 N/A 1.575 Inch

Max. Raw Stock Size Range "S"

 N/A 4.640 Inch

Tail Stock Force

 N/A 3490 lbs

Dim. "A"

 N/A 4.130 Inch

Dim. "B"

 N/A 9.410 Inch

Dim. "C"

 N/A 3.540 Inch

Dim. "b"

 N/A 60.000 Degree

Dim. "N"

 N/A 0.940 Inch

Notes

 N/A Requires Custom Drive Pins. Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.

Remarks

 N/A Clockwise use Left hand pins, CounterClockwise use Right-hand Pins