Riten Industries, Inc.
1100 Lakeview Avenue
Washington Court House,OH,43160 0340,US
Phone: 740-335-5353 • Fax: 740-335-4622
Email: info@riten.com • Website: http://www.riten.com

Print Back
The Type 49 Series allows a driving diameter of 2.72" to 3.90". The driving pins move independently to allow a five-degree pitch of the end face of the work-piece. The mechanical compensation and lock down center point allow a constant length to be held from center to the taper. The Type 49 Series is available in a flange mount. Chuck mounting can be achieved as described in the mounting procedures. View Catalog Page
Unit of Measure

Specifications

Tool Series/Type

 N/A 49

Design Type

 N/A Mechanical, TIR less than .001

Mounting Style

 N/A Flange Mount

MOUNT

 N/A FM

Drive Pin Part #

 N/A P4902

Pin Style

 N/A Offset

STYLE

 N/A 1

Driving Diameter

 N/A 2.720 Inch

Rotation

 N/A Clockwise

ROTAT

 N/A L

No. of Pin

 N/A 6

Pin Edge Length "L"

 N/A 0.20 Inch

Center Point Part #

 N/A C5105

Center Hole Diameter Range (Inch)

 N/A 1.929 to 2.165

Driving Diameter Ranges "G"

 N/A 2.72 - 3.90 Inch

Min. Raw Stock Size Range "S"

 N/A 2.756 Inch

Max. Raw Stock Size Range "S"

 N/A 7.800 Inch

Tail Stock Force

 N/A 3700 lbs

Dim. "A"

 N/A 4.528 Inch

Dim. "B"

 N/A 7.708 Inch

Dim. "C"

 N/A 5.200 Inch

Dim. "b"

 N/A 60.000 Degree

Dim. "N"

 N/A 1.380 Inch

Notes

 N/A Minimum Stock size should be .030 larger than driving diameter. Maximum Stock size should be no more than 2X driving diameter.

Remarks

 N/A Clockwise use Left hand pins, CounterClockwise use Right-hand Pins