Riten Industries, Inc.
1100 Lakeview Avenue
Washington Court House,OH,43160 0340,US
Phone: 740-335-5353 • Fax: 740-335-4622
Email: info@riten.com • Website: http://www.riten.com

Print Back
Imperial Carbide Centers cover the requirements for a wide range of workpiece center holes. They reduce costs by eliminating the need for special dead centers. Knockout ends are hardened on carbide tipped dead centers. Applying a Moly EP632 grease on the point will reduce friction and wear.
Unit of Measure

Specifications

Material

 N/A Large Carbide Point

Accuracy

 N/A ± .00005

Taper

 N/A 3

A - Point Diameter

 N/A 1.250 Inch

E - Gage Line to Back of Head

 N/A 0.370 Inch

Note

 N/A Carbide Diameter

H - Height above Center Line

 N/A 0.125 Inch

K - Gage Line to Point

 N/A 2.370 Inch

L - Length of Cut Out

 N/A 1.690 Inch

T - Carbide Tip Diameter

 N/A 1.000 Inch

Series

 N/A Imperial Large Carbide

Available Points

 N/A Carbide Tipped Half Dead Center