Live Centers
live-centers
The Adjusta-Point Live Center is yet another example. It is designed specifically for applications when a workpiece's center hole is not quite on center. The adjustable point locates in the center hole, centering the part by offsetting the deviation. The process is similar to indicating a part using a 4-jaw chuck.
The center is equipped with four external adjusting screws that can move the point up to 0.030" in any direction. Initially available in Morse tapers, with additional tapers by request. Specifications are shown on the reverse.
Bad center holes are an occasional nuisance, but with Riten's new Adjusta-Point Live Center, you have the tool to turn them from scrap into accurately machined parts. a8012.jpg
Low Profile Live Centers
Standard, Tracer and Long Point- Accuracy guaranteed to ± .0002
- Small housing diameter provides tool clearance
- Points are through-hardened to 61-63 Rc
- Full-length spindle for extra rigidity
- Less tailstock pressure required
- Body heat-treated for additional strength
- Riten full service and repair
Heavy-Duty Live Centers
(8)- Accuracy guaranteed to ± .0001.
- Four bearing design for heavier loads
- For use where the piece part may weigh several hundred pounds. Radial pressure and thrust requirements demand centers with bearing structures that will handle these loads.
Extra Heavy-Duty Live Centers
(7)- Accuracy guaranteed to ± .0001.
- Designed for heavy steel rolls, paper rolls, printing rolls, castings, forgings and other large parts.
- For use where the piece part may weigh several thousand pounds. Radial pressure and thrust requirements demand centers with bearing structures that will handle these loads.
"Blue Typhoon" Live Centers
(12) The Blue Typhoon is a technologically advanced live center, designed to add speed and efficiency to workholding operations. It was developed to solve many of the operating problems experienced with traditional live centers. Its exclusive Quad seals are designed to prevent coolant and other foreign materials from contacting the bearings, eliminating the contamination problems experienced with ordinary centers. bluetyphoon1.jpg
Light and X Light Live Centers
(12)- Accuracy guaranteed to ± .00005.
- Light live center designed for 2 to 10 lb. workpiece loads.
- X-Light live center designed for extremely light workpiece loads - 2 oz. to 2 lb.
- Excellent for very small workpiece. Used in medical, orthopedic, aerospace and similar applications.
- Free turning
- Maximum 8,000 RPM
Pipe Nose Live Centers
(24)- Accuracy guaranteed to ± .00025.
- For use with pipe, tubing and thin walled piece parts.
Spline Rolling Live Centers
(4)- Accuracy guaranteed to ± .00025.
- Tapered and ball bearings
- Points are through-hardened to 61-63 Rc
Bull Nose Live Centers
(54)- Accuracy guaranteed to ° .00015.
- Large workpiece center holes.
- Large piece parts.
Super Accurate Live Centers
(27)- Accuracy guaranteed to ± .00005.
- Compact design.
- Extended points available.
- Ideal for grinding.
- Five pounds of thrust to seat bearings.
Medium-Duty Super Accurate Live Centers
(23)- Accuracy guaranteed to ± .0001.
- Medium-duty for heavier cuts.
- Bigger bearing design for heavier loads.
- Five pounds of thrust to seat bearings.
- Extended points available.
Super Duty Live Centers
(6)High capacity, three-bearing live centers designed especially for the high loads, high removal rates, and close tolerance requirements of mill roll manufacturing and rebuilding. Handle loads of 62,000 lbs. and larger.
SUPER DUTY INTRO IMAGE.JPG
Adjusta-Point Radial Compensating Live Centers
(5) Over 40 percent of Riten's live centers are "specials," and a large number of current catalog models started out as a custom-engineered product for an individual customer.The Adjusta-Point Live Center is yet another example. It is designed specifically for applications when a workpiece's center hole is not quite on center. The adjustable point locates in the center hole, centering the part by offsetting the deviation. The process is similar to indicating a part using a 4-jaw chuck.
The center is equipped with four external adjusting screws that can move the point up to 0.030" in any direction. Initially available in Morse tapers, with additional tapers by request. Specifications are shown on the reverse.
Bad center holes are an occasional nuisance, but with Riten's new Adjusta-Point Live Center, you have the tool to turn them from scrap into accurately machined parts. a8012.jpg
Replacements for Ready Tool G and R Series Live Centers
(9)- Accuracy guaranteed to ± .0002
- Replaceable threaded point, custom points available
- Points are through-hardened to 61-63 Rc
- Sealed bearings lubricated for life, protected against contaminants and coolant
- Riten full service and repair
