Riten Industries, Inc.
1100 Lakeview Avenue
Washington Court House,OH,43160 0340,US
Phone: 740-335-5353 • Fax: 740-335-4622
Email: info@riten.com • Website: http://www.riten.com

Print Back
  • Accuracy guaranteed to ± 0.00005.
  • Through-hardened to 61-63 Rc for extra regrinds.
  • Carbide tipped dead centers are hardened only on the knockout ends.
  • Riten full service and repair.
  • Applying a Moly EP632 grease on the point will reduce friction and wear.
Full and Half Center&nbsp
Unit of Measure
Items Style 1 - Steel Full Center
71011
Dead Center Series 1 Morse Taper Hardened Tool Steel 3.31 Inch (in) P - Overall Length Full Center
List Price $122.00
 Style 2 - Steel Half Center
71012
Dead Center Series 1 Morse Taper Hardened Tool Steel 3.31 Inch (in) P - Overall Length Half Center
List Price $120.00
 Style 3 - Carbide Tipped Full Center
71013
Dead Center Series 1 Morse Taper Carbide Tipped 3.31 Inch (in) P - Overall Length Full Center
List Price $146.00
 Style 4 - Carbide Tipped Half Center
71014
Dead Center Series 1 Morse Taper Carbide Tipped 3.31 Inch (in) P - Overall Length Half Center
List Price $170.00
 Style 1 - Steel Full Center
71021
Dead Center Series 2 Morse Taper Hardened Tool Steel 4.19 Inch (in) P - Overall Length Full Center
List Price $110.00
Material N/A Hardened Tool Steel N/A Hardened Tool Steel N/A Carbide Tipped N/A Carbide Tipped N/A Hardened Tool Steel
Accuracy N/A ± 0.00005
Taper N/A 1 N/A 1 N/A 1 N/A 1 N/A 2
P - Overall Length N/A 3.310 Inch N/A 3.310 Inch N/A 3.310 Inch N/A 3.310 Inch N/A 4.190 Inch
B - Taper Length N/A 2.120 Inch N/A 2.120 Inch N/A 2.120 Inch N/A 2.120 Inch N/A 2.560 Inch
C/A N/A 0.475 N/A 0.475 N/A 0.475 N/A 0.475 N/A 0.700
D N/A 0.396 Inch N/A 0.396 Inch N/A 0.396 Inch N/A 0.396 Inch N/A 0.572 Inch
T - Carbide Tip Diameter N/A N/A N/A 0.250 Inch N/A 0.250 Inch N/A
H - Height above Center Line N/A N/A 0.140 Inch N/A N/A 0.140 Inch N/A
L - Length of Cut Out N/A N/A 1.000 Inch N/A N/A 1.000 Inch N/A
Series N/A Dead Center
Available Points N/A Steel Full Dead Center N/A Steel Half Dead Center N/A Carbide Tipped Full Dead Center N/A Carbide Tipped Half Dead Center N/A Steel Full Dead Center
Application N/A
Note N/A N/A N/A Carbide Diameter N/A Carbide Diameter N/A